The process of fattening out a landscape with ground cover plants is not difficult if the proper procedures are used. For this project, various things will be needed, such as different kinds of plants depending on the season.
The Benefits Of Flattening An Area With Ground Cover Plants
When an area is sloped, water runoff and soil erosion will be an issue. In addition, the moisture retention will be uneven. A sloped landscape is also tough to mow. The bottom of the slope is usually where water will travel and stop. Because of this, plants will have growth difficulties. Plants cannot grow well in areas that have too much moisture. This is just one reason why a sloped backyard might be flatten with garden plants.
How To Flatten A Landscape
Before tackling this project, all vegetation must be removed from the sloped area. If there are any plants that are worth keeping, use a shovel to dig them up. After the plants are removed from the ground, place them in pots and water them. After the plants have enough water, place them in a location that has shade. If there are no plants worth keeping, consider buying new affordable garden plants from an online plant nursery.
All digging must be handled effectively and efficiently, so contact local utility companies to inform them about the digging locations. A representative will visit the project location to provide information about buried water pipes, power lines, and phone lines.
An entire layer of topsoil should be removed while digging. Topsoil is a dark soil, and it covers the top eight inches. This soil should be placed into a pile. Next, place the subsoil at the bottom of the slope. Place the soil in the best locations to make a slight slope. The slope should be away from any buildings in the area. Use a rake to make the surface smooth.
You will also need a lawn roller. A lawn roller is available at any hardware stores or rental companies. Use the lawn roller over the ground to compact the soil. If there are any depressions, use a shovel to fill them with more subsoil.
Use an eight-foot long two by four on the slope at the top. The board should run down the slope. Use a level on the board to ensure that the board is level. The distance from the lifted end and the ground must be measured. The grade is correct if it is two inches. Once these procedures are complete, water the area to settle the soil.